In areas that are highly affected by snow falls during the winter months, the roofs of the houses are affected by the ice dams. They form on the edge of the roofs when the water that comes from the melting snow freezes and ends up forming a hill on the edge that prevents further melting. The water that is held here may then seep into your house and end up causing a major damage.
This brings the need for every person to make sure we that he or she immediately removes these ice dams on the early identification and one way that you can use is the application of salt or use of a rake to scrap it off. For those people who find it difficult to remove ice dams, there has come up various firms that help with the service of ice dam removal. The best ice dam removal firm should be hired by every person who is looking for the services.
There are some factors that should be considered before contracting an ice dam removal service for your home so that you get the best. The level of experience should be the first consideration to observe. Here you should look for a company that has specialized in the field of ice dams removal for the longest period. The reason for this is that they will be in possession of the right skills and expertise for the job. The prospective ice dam removal agency should be well bonded and also have a good insurance policy.
This cover should have covered the process of ice dam removal and not other types of insurance. This ensures that you will be well compensated in case there is a damage on your roof during the removal process of the ice dam. The best Ice dam removal service is the one that uses steam to remove the ice. The reason for this is because, this is one of the best and also the most effective and the safest methods of removal.
They should also have a boiler that is easily able to heat the water to about 250 degrees as at this point the ice dam is easily melted. It is also important to have a good check on the other equipments used. Here you check at the types of shovels and roof rakes. They should be having plastic cutting edges or if they are metallic, they should have plastic rollers and it is also advisable to use the new technological equipment which are more efficient. This ensures that you avoid any kind of damage that the metal edges could cause to your roof.